|8 inch TFT-LCD Display and 10 One-button Menus
|8-inch TFT-LCD display with 800 * 480 resolution
Most commonly used functions are accessible using 10 different one-button operation keys: Auto Setup, Default, Cursors, Measure, Roll, History, Display/Persist, Clear Sweeps, Zoom and Print
Supports auto detection of 10X probe with read-out port (200 MHz and 300 MHz versions only)
|Waveform Capture Rate up to 500,000 wfm/s
|With a waveform capture rate of up to 500,000 wfm/s (sequence mode), the oscilloscope can easily capture the unusual or small probability events
|Record Length of up to 140 Mpts
|Using hardware-based Zoom technique and a record length of up to 140 Mpts, users are able to use a higher sampling rate to capture more of the signal, and then quickly zoom in to focus on the area of interest
|256-level Intensity Grading and Color Temperature Display
|SPO display technology is the result of high refresh rate and multi-frame superimposition. In the unit of time, the higher the probability of a pixel waveform appears, the brighter the pixel.
|The degree of warm or cool of color suggests the probability of the appearing of waveform. The warmer the color, the higher the probability.
|Variety of Trigger Functions
|Edge, Slope, Pulse, Video, Windows, Runt, Interval, Dropout, Pattern, IIC, SPI, UART/RS232, LIN and CAN
|History function can record up to 80,000 frames of waveforms.
The recording is carried out automatically, so that the customer can play back the history waveforms at any time to observe unusual events, and locate the source quickly through the cursors or measurements.
Located on the keyboard Panel, this function is easily accessible
|Segmented memory collection will store the waveform into multiple (up to 80,000) memory segments and each segment will store a triggered waveform, as well the dead time information. The dead time between segments can be as small as 2μs. All the segments can be played back using History function.
|Comprehensive Statistical Functions
|Parametric statistical functions to display 5 parameters for any set of measurements: current, mean, minimum value, maximum value, and standard deviation. The measurement count is also displayed. The maximum number of measurements that can be run and simultaneously analyzed statistically is five. Supports Gating measurements, Math measurement, History measurement and Ref measurement.
|Advanced Math Function
|In addition to the traditional (+, -, X, /) operations, FFT, integration, differential, and square root operations are supported. The integration operation supports gating, which uses cursors to define the domain of integration.
|Eres mode can improve the SNR effectively, without the dependence on the periodicity of signal and stable triggering
|16 Digital Channels / MSO (Optional)
|4 analog channels plus 16 digital channels enables users to acquire and trigger on the waveform then analyze the pattern, simultaneously with one instrument.
|Serial Bus Decoding Function (Optional)
|Displays the decoding through the events list. Bus protocol information can be quickly and intuitively displayed in table form.
|Built-in 25 MHz Function/Arbitrary Waveform Generator (Optional)
|10 built-in waveforms plus 4 ARBs. The arbitrary waveforms can be accessed and edited by the EasyWave PC software
|USB Host, USB Device (USBTMC), LAN (VXI-11), Pass/Fail, Trigger Out