SDG800 Series Function/Arbitrary Waveform Generators

Product Overview

The SDG800 series function/arbitrary waveform generator family outputs waveform functions up to up to 5MHz (pulse), 10MHz (square), 30MHz (sine) and has a sampling rate of 125MSa/s. They are powered with SIGLENT’s EasyPulse technology which produces low jitter, fast rising/falling edges without being affected by frequency, even at low duty cycle settings, allowing the user a wide range of pulse widths and transition times. This results in a much more versatile generator than other similar DDS designs.

Category: Tag:

Description

Characteristics

Comparison of edge under 1KHz pulse signal
As shown in the figure, under 1KHz frequency, EasyPulse can keep quick rising/falling edge (20ns) while the edge of ordinary DDS is very slow.
Comparison of edge adjusting range under 1KHz pulse signal
EasyPulse edge adjustment has a wide range, while ordinary DDS pulse edge adjustment is limited.
Built-in 46 kinds of arbitrary waveforms (including DC)
SDG800 Series can output 5 kinds of standard waveforms and 46 kinds of commonly used waveforms, including common waveforms, mathematical functions, application functions, window functions and trigonometric functions.
Multiple modulation function
SDG800 Series support multiple modulation function: AM, DSB – AM, FM, PM, FSK, ASK, PWM, linear/logarithmic sweep and burst.
Supports PC editing software EasyWave
Siglent’s SDG800 Series of generators support powerful PC editing software, EasyWave, which can output arbitrary waveforms with 14bit vertical resolution and 16 Kpts wave length. EasyWave provides 9 standard waveforms: Sine, Square, Ramp, Pulse, ExRise, ExpFall, Sinc, Noise and DC, which meet all engineers’ basic needs. In addition, it provides a variety of drawing modes including manual drawing, straightline drawing (including horizontal straightline, vertical straightline, point-to-point straightline), coordinate drawing and equation drawing, making it easy to generate complex waveforms. Multiple Document Interface management allows for simultaneous multiple-waveform editing. The SDG800 Series provides 10 nonvolatile storage spaces for arbitrary waveforms, and you can also edit and store more waveforms through the EasyWave software.

Reviews

There are no reviews yet.

Be the first to review “SDG800 Series Function/Arbitrary Waveform Generators”

Your email address will not be published. Required fields are marked *